ASUS Z170-K Non-K OC BIOS

ASUS Z170-K Non-K OC BIOS

Support for BCLK Overclocking of CPUs like i3-6100, Pentium G4400, i5-6400, i7-6700 and all other non-K CPUs.

Don’t use this for K-series CPUs.
It might damage your hardware, no guarantees provided.

Issues found so far

  • No IGPU
  • No dynamic change of CPU frequency
  • No C-states
  • No Turbo Mode
  • CPU temperature reading is incorrect
  • AVX instructions have very low performance
  • Windows XP ACPI not supported

After flashing set the following settings to make it boot into OS with correct CPU speed

AdvancedCPU Configuration
- Boot Performance Mode -> Turbo Performance

AdvancedCPU ConfigurationCPU Power Management Configuration
- Intel(R) SpeedStep(tm) -> Disabled
- CPU C states -> Disabled

Detailed ASUS Z170 Non-K OC Guide

If you have trouble flashing this BIOS (downgrade from newer version), use this guide:

http://overclocking.guide/flash-back-older-bios-asus-z170/

[adrotate banner="6"]


NameASUS Z170-K Non-K OC BIOS
Categories,
Version0602
Size6.46 MB
Downloads5106
Total Files1
Create DateJanuary 11, 2016
Last UpdatedOctober 22, 2016
File
Z170-K-ASUS-0602.zip

23 comments

  • Kaudii

    in Advanced CPU Configuration no Boot Performance Mode is why you can not set this parameter, the other parameter set but unfortunately my i5 6600 does not start overclocked, the computer restarts and the BIOS returns to the default settings. Anyone have any ideas or manual how it all set up,

  • Kaudii

    ok my mistake, but modification works in AIDA64 shows me that the CPU runs at 4400 MHz and it is ok, but my question is it possible that my memory worked at a speed of 3200 MHz nominal or nietety only 2660 MHz. I will be grateful for your response.

  • J23

    I have Z170-K can’t overclock. Overlocking Failed !
    All parameters as recommended
    Except Boot Performance Mode – do not have it.
    Except XMP – do not have it

    Parameters:
    Advanced
    – Boot Performance Mode to Turbo Performance – do not have it !
    Advanced / CPU Configuration / CPU Power Management Configuration
    – Set Intel(R) SpeedStep(tm) to Disabled -> ok
    – Set CPU C states to Disabled -> ok
    Ai Tweaker / External Digi+ Power Control
    – CPU Loadline Calibration to Level 7 -> ok
    Ai Tweaker
    – Ai Overclock Tuner to Manual -> ok (XMP do not have it)
    – BCLK Frequency 128 Mhz / 135 Mhz / 137 Mhz
    – DRAM Frequency to 2536 MHz / 2700 MHz / 2557 MHz
    – CPU Core Voltage Override to 1.325 / 1.375 / 1.350

    Overlocking Failed ! Please enter setup to re-configure your system 🙁
    Anyone have any ideas ?

    Spec;
    Z170-K
    i5-6600
    16GB DDR4 2133Mhz

    • J23

      Uff, working!

      – BCLK Frequency 137 Mhz (137 x 33 = 4521 Mhz)
      – DRAM Frequency to 2192 MHz
      – CPU Core Voltage Override to 1.325

  • Manu136

    Ram Too high

    CPU I5 6500 2x8GB DDR4 CL14 (2133Mhz) Asus A170-K

    CPU 4432 Mhz
    DDR2400 (CL15-15-15-35)

    Vcore 1.30v
    VDim 1.20v
    BCLK 138.50

  • julio

    I can not overclock the G4500 with the motherboard Asus Z170-K please help me.
    How do I do it?

    • julio

      I can not overclock the G4500 with the motherboard Asus Z170-K please help me.
      How do I do it?
      TRIDENT DDR4 Z – 8 GB -3000MHZ – CL15

  • julio

    one more thing the BIOS version of your motherboard Asus Z170-K is the 0704. Thanks for your help.

  • julio

    although the version of the BIOS go 0602, is not let me overclock, please help me.

  • Kaudii

    Set the parameters in the Bios

    Advanced
    – Boot Performance Mode to Turbo Performance – do not have it !
    Advanced / CPU Configuration / CPU Power Management Configuration
    – Set Intel(R) SpeedStep(tm) to Disabled -> ok
    – Set CPU C states to Disabled -> ok
    Ai Tweaker / External Digi+ Power Control
    – CPU Loadline Calibration to Level 7 -> ok

    – BCLK Frequency 137 Mhz
    – DRAM Frequency at about 2600 MHz
    – CPU Core Voltage Override to 1.325

    and should work

  • julio

    Greetings. To 4.38ghz it is what works for me at the moment as it passes performance tests.

    With bios vertion is 0602
    Set the parameters in the Bios

    Advanced
    – Boot Performance Mode to Turbo Performance – do not have it !
    Advanced / CPU Configuration / CPU Power Management Configuration
    – Set Intel(R) SpeedStep(tm) to Disabled -> ok
    – Set CPU C states to Disabled -> ok
    Ai Tweaker / External Digi+ Power Control
    – CPU Loadline Calibration to Level 7 -> ok

    – BCLK Frequency 125 Mhz
    – DRAM Frequency at about 2666 MHz
    – CPU Core Voltage Override to 1.425

    Nothing bad, but I would like to take at least 4.8GHz.

    Thank you for your guidance to take it to 4.8GHz

  • Alex

    I cannot update to this bios… The Error i get in windows or EZFlash in bios is either Incorrect Bios or “The model of the bios image does not match the bios rom currently present”

    Can some one give me some advice ? Maybe i am doing something wrong …

  • Slava

    Hello! It will made driver BIOS overclocking for Kaby Lake non “K” ?

  • Alex

    Any one knows if the updated bios from 22 OCT 2016 fixes the Windows 7 issue ? I cannot install 7 on the machine, i tried 3 different types and i get BSOD after the 1st installation (before the 2nd to continue). Windows 10 works without issues but win 7, no chances …. 🙁

  • An outstanding share! I have just forwarded this onto a friend who has been conducting a little research on this. And he in fact ordered me dinner because I stumbled upon it for him… lol. So allow me to reword this…. Thank YOU for the meal!! But yeah, thanx for spending some time to discuss this topic here on your website.

  • Orlistat Avis Signs Of Amoxicillin Overdose Avelox Compared To Keflex [url=http://eulexin.net]viagra online prescription[/url] Levitra Zutaten Acheter Du Tadalis Sx En Pharmacie

  • Fuonder

    Okay can i download file? i some trouble. After i click on button “download” i have some sort of error page with text like this:
    “Warning: count(): Parameter must be an array or an object that implements Countable in /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/process.php on line 51

    Warning: Cannot modify header information – headers already sent by (output started at /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/process.php:51) in /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/functions.php on line 158

    Warning: Cannot modify header information – headers already sent by (output started at /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/process.php:51) in /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/functions.php on line 159

    Warning: Cannot modify header information – headers already sent by (output started at /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/process.php:51) in /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/functions.php on line 160

    Warning: Cannot modify header information – headers already sent by (output started at /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/process.php:51) in /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/functions.php on line 161

    Warning: Cannot modify header information – headers already sent by (output started at /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/process.php:51) in /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/functions.php on line 162

    Warning: Cannot modify header information – headers already sent by (output started at /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/process.php:51) in /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/functions.php on line 163

    Warning: Cannot modify header information – headers already sent by (output started at /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/process.php:51) in /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/functions.php on line 164

    Warning: Cannot modify header information – headers already sent by (output started at /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/process.php:51) in /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/functions.php on line 165

    Warning: Cannot modify header information – headers already sent by (output started at /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/process.php:51) in /homepages/25/d546451447/htdocs/clickandbuilds/OCGuide/wp-content/plugins/download-manager/functions.php on line 192
    PKQc�G?��m�� README.txt}R�j�0|��1)�~B�r�bB��Ε>�eOZ�”��*���o�r � �G�3;+�!��( ���.Јm{hq�<�w�8��HǑ3��n� 9sZV!�F2��y�nȟ��$�Q#ku�$�q�9�X)�b ���4QϘ�$���ߙ�B���՜���gou�ir.\eK�Ȃ�R�?ᛠ�"
    and after that a lot of such symbols Ϙ�$��� till end.
    What can i do with this?

  • Prix Cialis Tunisie Cheap Silagra 100 Mg [url=http://ciali40mg.com]cheap cialis[/url] Viagra 100 Mg 4 Comprimes Zithromax Alert

Leave a Reply

Your email address will not be published. Required fields are marked *